Capabilities and Machine Specs

Our machinery sets us apart– with it, we can meet the stringent standards of the automotive industry. See below our equipment and specifications.

Hand Shear

Betenbender Hydraulic

HR P&O, CR, EG, GA, GI, Stainless

SpecMetricEnglish
Thickness Range 0.25-6.35 mm .010-.250"
Length 1350 mm max 53" max
Tolerance +/-1.omm
Strokes 19/min.
Knife Length 1930 mm 76"
Hold Down Pins 13

Leveller No. 1 - Sonoda Engineering

HR P&O, CR, EG, GA, GI, Stainless

SpecMetricEnglish
Thickness Range 0.3-2.3 mm * 3.2 mm: 200 mm width max .011-.090” .126”
Width 100-920 mm 3.93-36.22”
Length 180-2000 mm 7.1-78.4”
Tolerance +/-0.2 mm per 1000 mm length at uniform line speed +/-0.5 mm at top and tail of a master coil
Incoming Max Weight 7000 kg 15400 lbs
Incoming Max OD 1500 mm 59.0”
Incoming ID 508 mm 20”
Number of Cuts 140 cuts/min. max
Squareness +/-0.5 mm per 1000 mm length
Line Speed 8-60 m/min max
Threading Speed 12 m/min
Piler Capacity 2000 mm length x 500 mm height x 2000 kg max
Finish Leveller
Pinch Roll 2 pcs x dia. 144 mm x 1060 mm L
Work Roll 15 pcs x dia. 60 mm x 1150 mm L Top 7 pcs / Bottom 8 pcs
Back Up Roll 17 pcs x dia. 69 mm x 500 mm L

Leveller No. 2 - Sonoda Engineering

HR P&O, CR, EG, GA, GI, Stainless

SpecMetricEnglish
Thickness Range 0.3-2.3 mm * 3.2 mm: 200 mm width max .011-.090” .126”
Width 100-920 mm 3.93-36.22”
Length 180-2000 mm 7.1-78.4”
Tolerance +/-0.2 mm per 1000 mm length at uniform line speed +/-0.5 mm at top and tail of a master coil
Incoming Max Weight 7000 kg 15400 lbs
Incoming Max OD 1500 mm 59.0”
Incoming ID 508 mm 20”
Number of Cuts 140 cuts/min. max
Squareness +/-0.5 mm per 1000 mm length
Line Speed 8-60 m/min max
Threading Speed 12 m/min
Piler Capacity 2000 mm length x 500 mm height x 2000 kg max
Finish Leveller
Pinch Roll 2 pcs x dia. 144 mm x 1060 mm L
Work Roll 15 pcs x dia. 60 mm x 1150 mm L Top 7 pcs / Bottom 8 pcs
Back Up Roll 17 pcs x dia. 69 mm x 500 mm L

Slitter No. 1 - Braner

HR P&O, CR, EG, GA, GI, Stainless

Tensile Strength: 49.2 kg/mm sq. max

SpecMetricEnglish
Thickness Width 0.25-6.35 mm .010-.250” Arbor Diameter 228.6 mm 9.0”
Range
Master Coils 1575 mm max 62” max
Slit Coils 50-1524 mm 2.0-60.0”
Tolerance +/-0.3 mm
Scrap Required 10 mm 0.4”
Max Weight 22500 kg 50000 lbs
Max OD
Master Coils 762-1828 mm 30-72”
Slit Coils 762-1828 mm 30-72”
Inside Diameter
Master Coils 508-610 mm 20-24”
Slit Coils 508-610 mm *ID: 610 mm by attachment 20-24” *ID: 24” by attachment
Thickness Width 0.25-6.35 mm .010-.250” Arbor Diameter 228.6 mm 9.0”
# of Slitter Head 2
Line Speed 305 m/min max 1000 FPM max
Slitting Full Loop / Push/Pull Pull Through (High/Low)
Crane Capacity 23000 kg 50000 lbs
Incoming Feed Over or Under
Outgoing Wrap Over Only
Other Feature Gamma Ray thickness
No. of Strands
Thickness Number (max) Speed (m/min max)
0.25-1.6 mm 28 305
2.0 mm 26 305
2.3 mm 24 305
3.2 mm 15 305
4.5 mm 14 100
6.0 mm 4 305
6.0 mm 8 100

Slitter No. 2 - Sonoda Engineering

HR P&O, CR, EG, GA, GI, Stainless

Tensile Strength: 55 kg/mm sq. max

SpecMetricEnglish
Thickness Width 0.6-7.0 mm .024-.275”
Range
Master Coils 400-1600 mm 15.7-62.9”
Slit Coils 45-1590 mm 1.8-62.5”
Tolerance +/-0.3 mm
Scrap Required 10 mm 0.4”
Max Weight 23000 kg 50000 lbs
Max OD
Master Coils 2000 mm 78.7”
Slit Coils 2000 mm 78.7”
Inside Diameter
Master Coils 508-610 mm 20-24”
Slit Coils 508-610 mm *ID: 610 mm by attachment 20-24” *ID: 24” by attachment
Arbor Diameter 240 mm 9.5”
# of Slitter Head 2
Line Speed 150 m/min max 492 FPM max
Slitting Drive Cut / Pull Cut
Crane Capacity 23000 kg 50000 lbs
Incoming Feed Over or Under
Outgoing Wrap Over Only
Other Feature Gamma Ray thickness
No. of Strands
Thickness Number (max) Speed (m/min max)
0.25-1.6 mm 21 150
2.3 mm 17 150
3.2 mm 14 150
4.5 mm 10 100
6.0 mm 8 75
7.0 mm 6 75

Slitter No. 3 - Sonoda Engineering

HR P&O, CR, EG, GA, GI, Stainless

Tensile Strength: 55 kg/mm sq. max

SpecMetricEnglish
Thickness Width 0.5-4.2 mm .019-.165”
Range
Master Coils 400-1350 mm 15.7-53.1”
Slit Coils 40-1340 mm 1.6-52.7”
Tolerance +/-0.3 mm
Scrap Required 10 mm 0.4”
Max Weight 20000 kg 44000 lbs
Max OD
Master Coils 2000 mm 78.7”
Slit Coils 2000 mm 78.7”
Inside Diameter
Master Coils 508-610 mm 20-24”
Slit Coils 508 mm 20” Thickness Number (max) Speed (m/min max)
Arbor Diameter 240 mm 9.5”
# of Slitter Head 2
Line Speed 180 m/min max 590 FPM max
Slitting Drive Cut / Pull Cut
Crane Capacity 23000 kg 50000 lbs
Incoming Feed Over Only
Outgoing Wrap Over Only
Other Feature Gamma Ray thickness
No. of Strands
Slit Coils 508 mm 20” Thickness Number (max) Speed (m/min max)
0.5-1.0 mm 21 180
1.0-2.3 mm 16 180
2.3-3.2 mm 11 150
3.2-4.2 mm 9 130